Computers Build It Series

The main memory on your motherboard will come in a variety of sizes and forms. These forms are SIMMs (Single Inline Memory Module) and DIMMs (Dual Inline Memory Modules). SIMMs come in 30 pin and 72 pin configurations. 30 pin memory has fallen by the wayside in popularity. They are usually only found on older systems with the slower Pentium style and slower 486 systems IT Services St. Louis. The 72 pin memory is also declining in popularity in favor of the newer DIMMs. Our recommendation is to use DIMMs whenever possible.

72 pin SIMMS are the most often used memory seen in systems today. Their sizes range from 4MBs up to the current 128MBs. They come in FPM (Fast Page Mode), EDO (Extended Data Output) and Parity SIMMs. The most often used type is EDO. These modules provide an increased performance factor over the FPM and Parity modules. Most all newer motherboard will accept EDO memory and is the recommended format of 72 pin memory. Parity memory can be used in on some motherboards. These modules provide an extra bit which is used to check the parity on the module. Although useful they are not generally used in today’s motherboards. FPM memory is the original type of 72 pin memory module. It will work in all motherboards that contain 72 pin memory slots. A safe bet if you don’t know what type of memory will work on your particular motherboard.

168 pin DIMM modules are the preferred format for use today. In many cases the motherboards seen on the market will only accept this type of memory. Pentium II motherboards are known to only accept this type of memory. There are many configurations of DIMM modules. SDRAM (Synchronous Dynamic Random Access Memory) and EDO (Extended Data Output) are the most common. These modules come in sizes ranging from 16MBs to 256MB as of this writing. They also come in buffered and unbuffered forms. Check your motherboard manual to be sure of what type memory your motherboard will support. In most cases your motherboard will support the unbuffered type. 168 pin memory also has two notches on the installation side of the module. Each notch configuration signifies a different module type such as EDO buffered and EDO unbuffered. Only one type will fit in a specific motherboard.

Another DIMM type is now in common use. It is designated as PC100 memory. This memory is designed to work on motherboards that support the 100MHz system bus speed. If you really want to make your system fast this is the type of memory you should use. Of course, it also requires the use of a motherboard that will support this speed. Super socket 7 motherboards and the BX chipset motherboards for Intel Pentium II 350MHz and up support the PC100 memory specifications. You will find the PC100 memory in 10ns, 8ns, 7ns and soon to be 6ns versions. Most motherboards recommend using 8ns or faster memory. This makes the 10ns versions of the PC100 memory obsolete already.

Installation of COM Ports

Finally we have gotten to a pretty simple set of items to install. The COM ports and printer port comprise just three items to install. We will also discuss the new USB ports while we are here. You say, “What are USB ports?” These are the newest communications ports on the market today. “USB” stands for Universal Serial Bus. The wave of the future is here today. There are not many items that support this bus as of this writing but that is changing daily. Soon you will see Monitors, Cameras, Printers and just about anything else you connect to the exterior of the computer case with the ability to take advantage of this bus. It is much faster and easier to use than the standard COMM and Printer ports. If you don’t have them yet you will with your next upgrade. They are built in to most ATX format motherboards and are available as an add-on for AT format motherboards.

Installing the COMM ports is fairly simple. Your new AT format motherboard comes with two expansion slot adapters that contain the COMM 1 and COMM 2 connectors on one adapter and the Printer Port connection on the other adapter. These can be installed directly to the back of the case in one of your available expansion slots. You may also take the ports off of the expansion slot covers and install them directly to the case in the knockout area of the case usually located closest to the power supply. In either case they will work just fine. We will first take a look at the expansion slot method.

We recommend that if you are installing the COMM ports and Printer Port in an expansion slot to locate them in the two slots closest to the power supply. This will make connection of the cables to the motherboard much easier and keep them from blocking other expansion slots. Your motherboard will also have the pins for these ports located just below these expansion slots. The easiest method to install the cables is to do it before you place the connector in the expansion slot. You will notice that the COMM port connectors have 8 pins on the cable. The motherboard has the same corresponding number of pins. On your motherboard locate the pins marked as COMM2. On your expansion slot connector locate the ribbon cable that is attached to the largest connector. This connector has 25 pins. Yes, I know. There are only 8 pins on the ribbon cable and 25 pins on the connector but that is just how it goes sometimes. Doesn’t make any sense but that is the way they make them. It just makes it easier to tell which is COMM1 and which is COMM2. Okay, look on the ribbon cable and notice that there is a red line on one side of the cable. In some cases this may be a dotted red strip. This side of the cable has the pin designated as pin 1. Find the 8 pin connector on your motherboard labeled COMM2. There should be a small “1” located on the end of the pins which designates the pin “1” location. Place the ribbon cable connector with the red stripe from COMM2 on the pins at the “1” location of the motherboard. In the same manner connect the ribbon cable connector for COMM1 to the motherboard location marked as COMM1. No you are ready to put the COMM port expansion slot cover into the case. This is pretty much self explanatory. Now your done with the COMM ports. Pretty simple wasn’t it. The next one is just as easy.

The printer port is the other expansion slot cover that came with your motherboard. The printer port connector has a ribbon cable with 26 pins. The printer port jack at the outside location of the expansion cover has 25 female pins. You will notice that this ribbon cable also has a red stripe on one side. Again this denotes the pin “1” location on the connector. On your motherboard look for the pins designated as “Printer” or maybe “PRN”. You can also check you manual for the location of the printer connector pins. Again look for the pin “1” location and connect the ribbon cable with the red stripe to the pin “1” location on the motherboard. Follow this by screwing down the expansion slot cover with the printer port jack to your case.

That’s It. You now have connected all of the COMM and Printer ports to your system. Now lets take a look at the USB port connectors. Guess what, they connect exactly like we did the COMM and Printer ports. The USB connector ribbon cable will have 18 pins. In the middle of the connector you will almost always find a closed off pin location. The motherboard will also have a pin missing in this location. This acts like a key so you can only put the connector on the motherboard in one direction. Find the location of this connector on your motherboard. It will be marked as USB or check your manual for specific locations. Attached is as we attached the ports above with the red stripe on the ribbon cable attached to the connector on your motherboard at pin “1”. Attach your ports to the exterior of the case and your done.

Srilanka Tour offers you Awesome Travel Destinations to Explore

Welcome to Srilanka one of the most beautiful country in the world visited by scores of tourists all the year round. melbourne river cruises federation wharf The country is globally acclaimed for its exquisite destinations which are endowed with scintillating beauty of nature, beaches, historical and heritage attractions, man made marvels, wildlife parks and sanctuaries, blissful ambiance and more of all the world class accommodations and hospitality that makes Srilanka the most tourist’s friendly country in the world. yarra boat cruises melbourne While on your Srilanka tour or if you are planning for holiday in Srilanka you have wonderful opportunity to see and explore some of the most enchanting destinations and attractions the country boosts for.

Some of the below mentioned are the major highlights of Srilanka tourism which you must not miss to visit are: Colombo

It is the capital city of Srilanka as well as the commercial and financial hub of the country. Apart from these the city is dotted with several fascinating enchantments which are amazingly beauty and provides wonderful opportunity to see and explore and treasure remarkable experience to relish in forever. Some of the prime among the many that you can visit in this capital city are Independence Hall, Mt Lavinai Beach, Gangaramaya Temple, Fort Clock Tower, Dutch Period Museum, Dehiwala Zoo, etc. Beregala

Located 175 kms away from the capital city Colombo, visit to Beregala is an enigmatic experience that any tourists will love to treasure the experience and cherish forever. Some of the major attractions that that you will never miss to visit on your tour are Bambarakanda Waterfall, Samanalawewa, Horton Plains, Belihuloya, etc. These places are amazingly beautiful and are worth to visit and see their beauty and charm that entice tourists for a visit. Kandy

One of the most popular tours and travel destination in the country of Srilanka, Kandy is the last royal capital. The city is amazingly beautiful dotted with enigmatic attractions which offer wonderful experience to see and explore and treasure remarkable experience of Srilanka tour. The city is dotted with several revered Buddhist temples which marks the major attractions of tourists. Embekke temples, Gadaladeniya temple, Lankatilaka temple and the Royal Botanical Garden mark the major attraction in this favored destination Kandy in Srilanka.

Apart from these there are many other enticing destinations such as Jaffna, Galle, Matara, Dambulla, Anuradhapura, etc which are also visited by tourists quite in a large number. These destinations are also endowed with enigmatic attractions and marks as the major attraction of Srilanka tourism. Visiting these wonderful places will truly be an experience that you will love to treasure and relish in the moments spent here throughout lifetime.

Beside these the world class accommodation facilities, amiable cool climate, blissful ambiance and on top the warm hospitality have truly made Srilanka the most sought after holidaying destination in India. Visit once and you will love to come back time and again to enjoy holidays in the blissful ambiance of Srilanka exploring the exciting destinations and their enigmatic attractions. Have a Wonderful Journey to Srilanka and Enjoy Vacation in a Delightful and Memorable Way.

Interior Designer Salary

Interior designer salary projections are fundamentally positive despite the effects of the economic downturn, but this is still not the highest paid career in the world. Office furniture Melbourne When you consider that modern designers have to undergo an extensive training program involving at least four years at a university, the salaries for starting designers are lower than you would expect. This is still a career, though, with longevity and prospects, with the opportunity to progress within a company or to go freelance when you are ready.

To understand why salaries have stayed relatively high for the profession of designer, you need to understand the difficulty employers have in finding people with the right qualifications. There are always going to be thousands of potential applicants for design jobs who have no formal qualifications or credentials for the job. These amateur designers may have a great potential to produce quality work, but the learning period that they would have to go through means that any employer will be reluctant to take a chance on them. There are always graduates who can go straight in and do the job right from the start, so employers are prepared to pay the extra money to get them.

This upward pressure on salaries is not enough to send them up to the level of professionals such as doctors and lawyers, but it does keep them high enough to stimulate great interest. The downward pressure which keeps salaries manageable for design firms comes from the fact that this is still a popular enough career to attract graduates in numbers. There are still a great number of graduates who for some reason decide that a design career is not right for them after all. Some become discouraged because they do not land a job as soon as they thought they would, while others simply find other interests and drift away.

Some of the most talented and resourceful and talented designers choose to escape the confines of the routine interior designer salary by starting their own business. While there is plenty of design work in the market in just about every major city, taking this step invariably involves a degree of risk. Those who are looking to have design work carried out are invariably going to want to see samples of previous work, and testimonials from the past. Very few designers can succeed as freelancers unless they have built up a reputation in paid employment first. This background will give them the chance to prove their worth and attract paying clients.

The life of the freelance designer has been changed out of all recognition in recent years, as computer software has enabled the job to be done far more effectively in a fraction of the time. Where there is a doubt as to which design should be followed, individual aspects of the design can be changed backwards and forwards at a moment’s notice of that comparisons can be made. The fact that design jobs can be completed more quickly means that prices can be cut in an effort to beat out competition. This leads to a fall in prices across the whole industry.

The future of the average interior designer salary cannot be predicted with any certainty, especially at a time when it is impossible to predict the future of the global economy as a whole. It is unlikely, though, that it will change to any marked degree. The housing market is resistant to depression because it is the most fundamental of human needs, and most of the demand for interior design comes from the more affluent section of the market in any case.

Carpet Cleaning Solutions For Tough Stains

Everyone knows the anguish of finding a nasty mark on the carpet, but couple of unequivocally comprehend carpet cleaning solutions that may be completed at home. Whether the mark is caused by coffee, jam, or house pet waste, there are tricks to help eliminate it. Water damage repair in Sydney Even wily problems similar to belligerent in nipping resin or hunger corrupt may be private if a person knows what they are doing. Here are a few tips for a couple of the toughest carpet stains.

It is very familiar for house pet owners to have the need for carpet cleaning solutions. Time is of the hint when treating dog and cat accidents. The longer a mark is left sitting before treatment, the stronger the smell and harder to treat. The initial step is to peck out as ample as probable with a desk pad of absorbent paper towelling, then emanate a combination of next to tools comfortable H2O and white old wine and flow it over the area. Cover with a folded towel, place a few weight on it and leave it for a couple of hours. Later the stained area will need to have uninformed H2O poured over it to soak it and then it will must be good blotted until scarcely dry. If a few smell remains, shower baking soft drink liberally into the dusty carpeting, let lay for two hours and void thoroughly.

There are even carpet cleaning solutions for one of the toughest things to eliminate from carpets and rugs — nipping gum. Everyone knows the ill feeling of seeking down to the building mats in the automobile and finding that they had tracked nipping resin off the parking lot into the car. Worse nonetheless is finding it on the carpets in the home. There are a few carpet cleaning solutions existing commercially that will help break down the resin and let go its hold on the fibres. Another way of getting absolved of resin it to expand a sandwich size bag with ice cubes and lay it on the spot. The longer you can leave it and the harder it freezes, the more successful withdrawal will be. If it is essentially sitting on the aspect of the rug, the refrigerated resin will simply flay out of the fibres. However, if it is belligerent in, it may turn vital to once in awhile re-freeze the resin and then scratch at it with a list blade until it is entirely removed. Vacuum often while scraping to washed divided the loosened pieces so they do not stick again. Prevention is always elite but when the accidents happen, and they will, it is willing to help to know there are solutions.

These solutions are very willing to help but might seems wily and complex to a few people. If you find them as well tough then you will need the veteran help of carpet cleaning company. They will ensure that the toughest stains are private leaving you with a brand new seeking and uninformed carpet.

10 Future Cars That May Save Gas But Definitely Waste Water

Students of Auto Design universities show to us, usually, prototypes and concepts futuristics whose sole purpose is to exercise limitless linked a possible serial production and costs that derive from this. Car paint protection Melbourne We see such prototypes that function on the basis of electricity or energy produced by using … algae.

Let`s see ten car concepts of the future:

  1. Pierre Sabas – Airflow
    The thought of the French student Pierre Sabas is built entirely of glass, each wheel having an engine of their own. “We actually tried to paste and a bottle modelez body of the car as it modeling a textile material outside. This lead to a special feeling for the drive and a new perception of the world for passengers,” the paper support the creator. Airflow already won a prize, Best Design Interpretation, in the Pilkington Automotive Vehicle Design Awards.
  2. Jon Radbrink – Lexus Nuaero

A Swedish student pictures form a European model for an American of Japanese brands. That could be characterized Nuaero Lexus concept, one in which the building is glass, too, the first important material. “I was inspired by architecture and glass used in combination with other materials to create a layer effect to give them the feeling of transparency of the car,” says Jon. Lexus Nuaero won the “Best use of Glazing” Pilkington, which award recognizes the inspiration of using glass composition in the car.

  1. Arturo Peralta Nogueras – Senses

If we take the concept created by students of the University londoneze Spanish, we could believe that the world is heading towards self ecology or in top performance. Senses work on the basis of algae and is covered with what Arturo Peralta denumeste “technology hologramica solid.” In addition, interiorulse always adapt the environment by passing car and passengers, evoluand depending on the states of the car.

4.Dong Kyu Kim – Chameleon
If your goal in life was a car that is inspired by the few female specific items – such as gulerele camasilor, esarfele fluturand in beating sprancenele wind or a woman – you find one. It is called Chameleon and, as the name says, changes its color technology with paramagnetice. The image that an asymmetric develop is because that, says Korean student, is also a good dresses: never will look perfect.

  1. Ilaria Sacco – My Lounge

Those of you with the ordinary style Ikea will receive with open arms creation tanarului italian designer. My Lounge is “my” that allows very personal approach to the interior, which can be aranjatin depending on the status of those who are inside. Basically, customers could choose their desired and arrange everything you get in the car, the car became, says Ilaria Sacco, “a dining room in which furniture can be arranged anyway.”

  1. Joonas Vartola – Iomega

Iomega is created specially for those who believe that relaxation is the strong points of a car. Basically, those counts in vision are designerului Finnish passengers, which are sit down separately in Iomega driver. An interesting element is that the exterior of the car was inspired from animal world, replica image of the swans.

  1. Paul Howse – Enigma

Paul Howse engineers auto show them how to escape from the eternal problem of suspensiilor we are so many problems in the street cars today: levitation magnetic. The concept Enigma, the cabin is separated from the rest of the car through this innovation which evoke the state rejection of two magnets with the same pole. We do not know how to secure the lead car, given that there is a place in the driver acceptiune classic, but it is clear that work on solar energy captured by body formed panels specially designed for this.

  1. Raquel Lopez Aparicio – Soft vehicle

The desire of some to stay on the clouds could become reality if the prototype spanish Lopez would ever enter series production. Basically, the car is made of a soft foam surrounding you when you are driving. The logic is destanuita us even car designer “a soft car is a car safer.” Soft boot has Vehicle, which can be reached by simply opening the posterior fermoar.

  1. Sergio Loureiro Da Silva – Phoenix

Although the name might suggest, or so Phoenix does not have anything to do with the regenerative properties or constituents of a bird, no matter what it is. The Spanish students succeed, but to attract attention through the turbine front and what Da Silva denumeste “axis kinetica.” May simple ibericul tried to “imperecheze” a car with a motorcycle and came out Phoenix. Maybe the Austrians from KTM should consider its work for the next generation of X-Bow.

  1. Woo Jeong Yun – Transform

Celebrele toys Modelino make their appearance in the form of car futuristic. Designer Korea’s Tranform claims that the car can be turned into any simply by drawing / impingere / waiver / trip to each of its parts. “I was interested in jucariile type Transformer since when I was small. It’s one thing common to all the guys in the world, such as the claim that is part of human instinct,” says Asian students in an attempt to explain his work.

Dental Care Tips for Children

These days in the fast moving life where everyone is so busy there is hardly anytime left to take care of our body, teeth, etc. Even if we take good care of ourselves, it is important that we do not overlook the dental care of our kids. You may visit for more dental tips.

It is extremely important that you understand the basics of children’s dental and oral care, because at this stage of dental care you are going to lay down a healthy and a strong dental care for the future. One best way which can help you to familiarize with the oral care needs of your child so that they have strong dental habits in the future is that you can educate yourself with the various fundamentals of children’s dentistry.

Oral Hygiene

It is important that the children’s brush your teeth twice and regular dental check ups are important in building good oral hygiene at an early age. It is important hat you brush your child’s teeth until they are big enough to do so. Brush your child’s teeth the right way. Select a small and a soft brush and pea size tooth paste is enough as it will not interfere in your brushing and it will not form much foam also.

Preventing Tooth decays by Cavities

Tooth cavities can be easily be prevented by good oral health, however some additional steps can be incurred to maintain your child’s tooth against the attack of cavities. You can use toothpaste which contains fluoride. As soon as your child’s permanent teeth have erupted it is important that you speak to the dentists about the application of sealants. Sealants are clear and a protective coating applied on the biting surfaces of the back teeth. The sealant protects against the cavity from shielding against the bacteria and plague. They are mostly placed on the back teeth, because these are the areas where there are more chances of being attacked by cavities.

Dental Habits

Although the children can develop good oral habits at an early age it is equally important that they break the bad habits like going to bed with a bottle, this is an extremely bad practice drinking any fluid which has sugar in it can cause the tooth decay very fast as the sugar substances react on the teeth throughout the night which in turn can cause the tooth decay as early as possible. Another habit which is considered as bad is the thumb sucking or the finger sucking habit. It is also a very bad practice to swallow the tooth paste.

Dental Problems

Incase your child does develop cavities in his baby teeth that it is important that you visit a dentist and get his cavities filled. Do not be in the assumption that there is no requirement of the cavities to be removed because the baby teeth would inevitably fall down, many kids do retain their baby kids for a long time and the cavities can be very painful at times.

Basic Design Examples

Water fountains
Water fountains may be an enjoyable way to alter any home environment. The “music” of falling water can be timeless and can provide any home with a very comfortable feeling. And there is something primal about water cascading over a waterfall or rushing through the rapids.

The minimum elements needed to make a tabletop fountain will be a small underwater pump (available from aquarium shops and garden centers), a large bowl or other leak proof container, a prop to hide the pump, marbles or rocks, flexible tubing which plugs into the pump, one small copper elbow to point the flow of water, and (naturally) water. Lighting is very critical to the total effect of a fountain. There exists a singular beauty when light reflects off water. One could utilize halogen or LED pool lights, under-water fountain lighting, and outdoor lights, plus multi-colored lenses to produce that little extra character. When building a tabletop fountain and its lighting, you will need to take into consideration whether the fountain will be seen from the side or all around, which allows you to increase its effect. 1 Stop Indoor Fountains can assist with any questions you might have.

Click here to visit Home Extensions and Renovations in Melbourne

Creating a peaceful mood with an indoor table fountain
The placid tranquility of a Japanese garden can be easily available nowadays in the shape of an indoor table fountain. Stress is a major health problem in these modern times, but with a table fountain producing “water music” you can reduce that stress due to its calming influence. Not only are most table fountains portable and easy to keep clean, but they are generally quite inexpensive unless you want to spring big money for a more elaborate custom-built model. Table fountains are available in lots of striking styles such as Japanese tea garden themes, American farm-life themes for an old fashioned look, or postmodern art themes for an up-to-date decor. Custom-built fountains are pricey, but you can find websites which will show you how to design and build your own unique fountain using inexpensive items you can find in hardware stores. There are a few safety issues you must keep in mind, specifically the potential for the fountain getting tipped over by pets or small children. Another safety concern, which should be obvious but bears repeating, is that you never place a water-bearing unit near electronic gear such as televisions, computers, or stereos. Indoor table fountains are constructed of a wide selection of materials including terracotta, metal, concrete, fiberglass, slate or ceramic, and all of them create a soothing, natural aura for your home or office. More information to help you buy indoor table fountains.

Floral fabric
There’s nothing equal to floral decorator fabric to provide the rooms of your home an open, bright and inviting decor. Using floral fabric provides the best opportunity to create a colorful decor with kitchen accessories, wall coverings and bedroom accessories, as well as blankets, pillows and bedspreads. Throw pillows are an easy decorative project, since they require no pattern and only need a few easy-to-find materials like fabric, batting or foam for the insides, and thread to sew it all up. After you have co-ordinated the floral fabric of the pillows, blankets, rugs, walls and drapes you will end up with a gorgeous decor which is as lovely as it is unique. Floral fabric has an unlimited number of decoration and fashion options, including making purses, hats and scarves that are bright and spirited. Why not expand the use of floral fabric even more by coordinating other articles of clothing with your floral decor such as floral print clothes for the women and floral-themed ties for the men. For the best understanding of the potential of floral fabric, take a glance at a few catalogs to pick out patterns and colors that will exactly match the decor of your home. Floral decorating materials will be most appropriate for festive holidays like New Years, Valentines Day, Thanksgiving, and Christmas, or whenever brilliant, sunny colors are called for.

Compact bedroom? A loft bed may be the answer
Utilizing a loft bed in a bedroom can be an easy way to make extra usable floor space when furnishing a small or compact room. Regrettably over time loft beds have become associated with decorating on a budget, because loft beds are frequently relatively economical. The simple truth is that a good quality loft bed is going to add functionality as well as excellent style and visual appeal to your bedroom and that means you do not have to trade one for the other.

A loft bed works by simply raising the bed onto a frame and then lifting it a few feet above the floor. This is similar to a bunkbed, but without the bottom mattress and frame, so there is an open space underneath the bed. This area can be terrific for a desk and chair for a work place, or a small couch, chair or love-seat for more seating, or as a fun area for kids. Bookshelves, dressers, music equipment, and televisions can be neatly put underneath the bed. You can even put in a fold-up bed so as to create a temporary bunk bed.

When looking for a loft bed for any bedroom you want to take into account the height of the ceiling and the dimensions of the room. This is very important since you don’t want to pay for a loft bed and then have a relatively cramped bedroom simply because you acquired one which was too big for your room. You are going to generally need the bed to be high enough that you are able to make use of the space below for beneficial uses, but you do not want the bed to be so elevated that the person sleeping on the bed may bang their head on the ceiling whenever sitting straight. You can even purchase a shorter loft bed should you be solely interested in extra storage space for a dresser or cabinets.

Loft beds are typically more common in kids bedrooms and student dormitory rooms. It is typical nowadays that the college-age child is going to share his / her dorm room with one or more students, resulting in a very crowded and cramped room. By getting a loft bed for their room, you are able to help make a more comfortable as well as relaxed room for everybody living there. One of the wonderful things about loft beds in kids bedrooms is that when you’ve got a couple of kids they have a tendency to battle over which one gets the upper bunk when you are buying bunk beds to help you save on space. With two separate loft beds inside the bedroom, each child will have their very own top bed and they also will still get lots of floor space for playing and / or studying. You can also utilize fabric to hide the space beneath the bed by easily draping them over the edge of the bed, thus setting up a separate, secret play area for each youngster if they need to have a quiet moment.

In this day and age loft beds have come into style due to the fact that so many more families have older homes, smaller apartments or condos. The extra area created by these kinds of beds is fairly large and can go a long way towards reducing the problem of putting “ten pounds of stuff in a five pound bag” without breaking your budget.